Optical Prisms

Beam Splitter Penta Prism

Beam Splitter Penta Prism

OPTICA provides many kinds of high precision prisms, including Penta Prism, Beam splitter Penta Prism, Right Angle Prism, and Corner Cube. Our micro Penta Prism and Right Angle Prism are widely used in optical communication, such as optical switches. For more information about Micro Prism, please refer to “Micro Optics”. Other prisms, such as Dove Prism and Roof Prism are also available upon request.

 

Lens: Beam Splitter Penta Prism

Application: Laser Leveling Instruments

Material: BK7

Specification

Grade

Material

BK7

Diameter Size

10mm To Maximum

Thickness Tolerance

+0.0, -0.03mm

Angle Of Incidence

45`

Effective Focal Length

+2%

Dimension

+/-0.2 (General), +0/-0.05 (High Precision)

Flatness

Lambda/2(General), Lambda/8 (High Precision)

Corner Cube Prism

Corner Cube Retro Reflector are used to reflect light beam back to the direction that it comes from. The reflected beam is always parallel to to the incident beam, and it travels in the reverse direction of the incident beam. This hold true regardless of the angle of incident beam.

 

The beam reflection is achieved either through total internal reflection or by mirror coating on the rear surface of the retro reflector . An Incident beam filling the effective aperture, is reflected exactly back on itself.

 

The Protective Al2 coating can be given to the rear reflecting Surface to avoid total internal reflection failure at high incident Angle.

 

 

Lens: Corner Cube Prism

Application: Test

Material: BK7

Specification

Grade

Material

BK7

Diameter Size

10mm To Maximum

Thickness Tolerance

+0.0, -0.03mm

Angle Of Incidence

45`

Effective Focal Length

+2%

Dimension

+/-0.2 (General), +0/-0.05 (High Precision)

Flatness

Lambda/2(General), Lambda/8 (High Precision)

Dove Prism

Penta Prism

Lens: Dove Prism

Application: These Lenses Have Considerably Reduced Values Of Spherical Aberrations. Best Used To Replace Single Components Where Performance Must Be Improved.

Material: Combinations Of Two Optical Grade Glasses

OPTICA provides many kinds of high precision prisms, including Penta Prism, Beam splitter Penta Prism, Right Angle Prism, and Corner Cube. Our micro Penta Prism and Right Angle Prism are widely used in optical communication, such as optical switches. For more information about Micro Prism, please refer to “Micro Optics”. Other prisms, such as Dove Prism and Roof Prism are also available upon request.

Coated dove prisms feature a protected aluminum coating with black Krylon paint on the diagonals and are ideal for displaced retro reflection. They provide a U-turn for laser beams.

Specification

Grade

Material

BK7

Diameter Size

10mm To Maximum

Thickness Tolerance

+0.0, -0.03mm

Angle Of Incidence

45`

Effective Focal Length

+2%

Dimension

+/-0.2 (General), +0/-0.05 (High Precision)

Flatness

Lambda/2(General), Lambda/8 (High Precision)

Equilateral Prism

Penta Prism

Lens: Equilateral Prism

Application: Equilateral Prisms Are Normally Used As Dispersing Prisms

Material: BK7

Equilateral prisms have three equal 60° angles and are also referred to as dispersing prisms. Equilateral prisms are used for wavelength separating applications. Optica offers equilateral prisms in both uncoated and anti-reflective versions.

Equilateral prisms are normally used as dispersing prisms. As well as standard BK7 prisms, higher index. SF2 and F2 prisms are offered to increase the dispersive power.

Specification

Grade

Material

BK7

Dimension

+/-0.2 (General), +0/-0.05 (High Precision)

Surface Flatness

< Lambda / 8 @ 633 Nm

Surface Quality

<20 / 10 (For BK7A) <40 / 20 (For SF10 & F2)

Diameter Tolerance

< + 0.00 / U2013 0.20mm

Effective Focal Length

+2%

Material

Angle Tolerance

Surface Flatness @632.8 nm

Surface Quality

Bevel/Chamfer

Coating Options

BK7

60° +/-3 arc min

Lambda /4

60-40

0.3 x 45°

  1. Uncoated
  2. Single layer MgF2 ARC (400 - 700nm)

Size

Dimension Tolerance

12.5 mm

+/-0.1

15 mm

+/-0.1

25 mm

+/-0.1

37.5 mm

+/-0.1

50 mm

+/-0.1

Penta Prism

Penta Prism

It is commonly used in Plumb Level, Surveying, Alignment, Range finding and Optical Tooling. The reflecting surfaces of this Prism must be coated with a metallic or dielectric coating. The standard Penta Prism reflecting surfaces are coated with aluminum with Black Paint.

 

Lens: Penta Prism

Application: For Custom Applications, Anti-Reflection Coatings Are Applied To The Entrance & Exit Surfaces.

Material:BK7 Grade A Optical Glass

Penta Prism is a Five –Side prism, It has two important properties, First the image is neither inverted nor reverse while deviated by 90 degree. Secondly, It is a constant deflection device; i.e all the transmitted rays are deviated by the same exact 90 degree. Slight movement of the prism does not effect the true right angle.

Specification

Grade

Material

BK7

Diameter Size

10mm To Maximum

Thickness Tolerance

+0.0, -0.03mm

Angle Of Incidence

45`

Surface Quality

60-40 Scratch And Dig

Dimension

+/-0.2 (General), +0/-0.05 (High Precision)

Deviation Tolerance

According To The Table

Reflectivity

R > 95% Per Face @400-700 Nm

Right Angle Prism

Penta Prism

Penta Prism is a Five –Side prism, It has two important properties, First the image is neither inverted nor reverse while deviated by 90 degree. Secondly, It is a constant deflection device; i.e all the transmitted rays are deviated by the same exact 90 degree. Slight movement of the prism does not effect the true right angle.

Lens: Right Angle Prism

Application: Telescope Diagonals, Range Finders, Microscope Image Bender, Periscope , Bore Sights And To Make Cube Beam Splitters Etc..

Material: BK7

Specification

Grade

Material

BK7

Diameter Size

10mm To Maximum

Thickness Tolerance

+0.0, -0.03mm

Angle Of Incidence

45`

Effective Focal Length

+2%

Dimension

+/-0.2 (General), +0/-0.05 (High Precision)

Reflectivity

R > 95% Per Face @400-700 Nm

Material

Angle Tolerance

Surface Flatness @632.8 nm

Surface Quality

Bevel/Chamfer

Coating Options

BK7

90° +/-3 arc min

Lambda /4

60-40

0.3 x 45°

  1. Uncoated
  2. Single layer MgF2 ARC (400 - 700nm)

Size

Dimension Tolerance

12.5 mm

+/-0.1

15 mm

+/-0.1

25 mm

+/-0.1

37.5 mm

+/-0.1

50 mm

+/-0.1

We are a pioneer in the manufacturing of Precision Optics such as Optical Lenses, Optical Filters, Optical Mirrors, Optical Prisms, Optical Window, Beam Splitter, Thin Film Coating, and Opto-Mechanical Products & Systems. Get a Quick Quote now!

Monday to Saturday 9:00AM to 6:30PM +91-9886654729 info@opticsindia.com

X
X