Laser mounts provide 360-degree coarse movement in one axis and tilt
adjustment form bottom side. We can mount up to 50mm diameter laser & will
achieve the beam axis by fine adjustments.

Cylindrical Laser Mount

This robust mount securely fastens long cylindrical devices such as laser tube. Thumbscrews firmly mount the laser tube at both ends to maintain a dependeable mounting. A clearance-mounting hole located at the center of gravity allows a quick and reliable setup and an easy access to the mounting screw from the top. A tilt from-7mm to +4mm is provided for fine tune.

  • +4mm, -7mm tilt adjustment for aligning laser beam.
  • Accepts cylindrical lasers upto 55mm diameter.
  • Clearance hole for 1/4-20 (M6) mounting.

Standard Laser Mount

This 04LMS series offers a simple and stable way of mounting laser tube or other cylindrical objects to surface like optical table. A nylon-tipped setscrew is provided to prevent laser tube from wobbling while mounted in place.

  • Simple, stable way of mounting round laser tubes.
  • Laser held without wobbling by nylon tipped setscrew.
  • Clearance slot provides +or-3` pitch adjustment.

Precision Laser Mount

Precision laser mount 04LMR-series are useful when both low cost and tilt adjustment are necessary. Two independent precision screws are provided for adjustments on two perpendicular axes. A nlyon-tipped set screw is provided to prevent laser tube from wobbling while mounted in place.

 

  • Low cost consideration
  • Individual M6 X 0.25mm pitch fine adjustment screw in two axes.
  • Adjustment range +or-4`
  • Laser held without wobbling by nylon tipped set screw
  • Four diameter models for laser heads with diameter of 1.28, 1.4, 1.53, 1.77 inch
  •  

Precision laser mount 04LMP-series are useful when direct position reading is necessary. Two independednt precision micrometers are provided for adjustment of +or-4` in two perpendicular axes. A nylon-tipped setscrew is provided to prevent laser tube from wobbling while mounted in place.

  • Individual, precision micrometers provide adjustment in two axes.
  • Adjustment range, +or-4`.
  • Laser held without wobbling by nylon tipped setscrew.
  • Four diameter models for laser heads with diameter of 1.28, 1.4, 1.53, 1.77 inch